VMAC Underhood air compressors for trucks and vans
The Underhood air compressor from VMAC is a rotary screw air compressor that is mounted under the hood of the truck and has capabilities ranging from 40 cfm up to 140 cfm at 100 percent duty cycle. The air compressors are lightweight and space saving, while delivering powerful on-demand air in any climate. In addition to the Underhood compressors for trucks, VMAC manufactures a version specifically engineered for commercial vans. 800-738-8622; www.vmacair.com.
Doosan Portable Power dual-flow air compressor
Doosan Portable Power P250/HP210 Tier 4 Final portable air compressor delivers the pressure and flow typically supplied by two units in a single air compressor. The new model replaces the P250/HP185 and delivers 250 cfm of air at 100 psi in low-pressure mode and 210 cfm of air at 150 psi in high-pressure mode. It offers eight hours at 100 percent load on low-pressure and nine hours at 100 percent load on high-pressure mode. It has a 34.5-gallon fuel tank, and cold starts in temperatures as low as negative 10 degrees F. To simplify maintenance, it has convenient curbside discharge valves and cooler clean-out ports. All filters are readily accessible and clearly marked and diagnostic connections are easier to reach. 800-633-5206; www.doosanportablepower.com.
Jarraff Industries LineBacker brush cutter
The LineBacker brush cutter from Jarraff Industries features a quad track undercarriage, which provides mobility in the most challenging terrains. In addition to the quad track configuration, it offers an innovative touch-screen control center that gives good operational input. The unit’s Cummins 260 hp, 6.7L Tier 4 diesel engine meets Environmental Protection Agency regulations, and improves overall fuel efficiency and roading speed. Effective with the quad track introduction, the Geo-Boy model will be rebranded as the LineBacker going forward. 800-767-7112; www.jarraff.com.
Fecon BHP270 power pack for larger excavators
Fecon’s Tier 4 compliant BHP270 power pack is for larger excavators (over 20 tons). It is an independent power source that provides additional hydraulic horsepower to operate attachments like the Bull Hog mulching head without hydraulic flow from the host machine. The BHP270 delivers up to 109 gpm of hydraulic flow for maximum power on the job site. The Power Management microcontroller channels all power to the brush cutter so there is no power loss due to accessories. A firewall inside the engine compartment keeps airflow from the engine side separate from the hydraulic side. A Rexroth 145cc hydraulic pump produces maximum pressure of 5,800 psi and hydraulic flow of 109 gpm. 800-528-3113; www.fecon.com.
