Find the Right Drill For Your Next HDD Job

This content is sponsored by Vermeer. Sponsored content is authorized by the client and does not necessarily reflect the views of COLE Publishing. View our privacy policy.
Find the Right Drill For Your Next HDD Job

Interested in Drilling?

Get Drilling articles, news and videos right in your inbox! Sign up now.

Drilling + Get Alerts

Drilling in rock up to 10,000 pounds per square inch in hardness, rock drilling systems for single-rod machines are qualified for most horizontal directional drilling operations. Above 10,000 pounds per square inch, however, the demands on the machine and tooling call for a different kind of downhole power.

But the right drill is just one component of a successful HDD job. Knowing the makeup of the rock you’ll encounter downhole can help identify which HDD machine and downhole tooling will be right for your job site, both in terms of cost and productivity.

“The specific rock you’re drilling in and how many passes you’ll make through that rock will help determine the rig size you need to operate,” says Vermeer Lifecycle product manager Jason Zylstra. “Cost of operation and the time frame for getting a job done also contribute to which machine you decide to use.”

Whether adapting an existing rig to include an air hammer or mud motor, or purchasing a dedicated dual-rod machine, many contractors have found success in diversifying their operations to take on rock projects. How can you determine which option is best for your next HDD job? Here are a few characteristics of each type of machine that can help with that decision. 

Air hammers 

These machines work similar to a jackhammer, only with a blunt-nose bit featuring carbide buttons. Air hammers are effective in HDD applications in rock with a compression strength of 18,000 pounds per square inch and above.

Air hammers employ repeated concussion to break up solid rock to a flowable form. One drawback with air hammers is the availability of adequate power equipment; a large compressor is required to power an air hammer, and they’re sometimes in short supply in many areas. And large compressors can add to the cost of a job completed with an air hammer.

Mud motors

Mud motors use high-pressure drilling fluid to independently power a downhole tri-cone or polycrystalline diamond compact bit. Because mud motors tend to require a larger amount of drilling fluid than other types of machines, they’re often paired with a reclaimer on the job site.

Mud motors are often rented and frequently rebuilt, which can help reduce maintenance for the contractor. 

“The drawback of mud motors is that they’re mostly limited to larger rigs, 60,000 pounds and above,” Zylstra says. “Renting is an attractive scenario for many contractors. If everything goes right, it’s easier to understand any potential drill head maintenance needs.”

Dual-rod machines

Dual-rod systems use two independently controlled drill rods, one within the other, during operation. When in pilot bore mode, an outer rod provides rotation for steering, while an inner rod provides rotational torque to the tri-cone or PDC bit. Among rock-focused drilling systems, dual-rod machines can be a very versatile option. They are qualified for conditions ranging from mixed rock to solid rock.

Although, air hammer and mud motor machines can be the better option in operations with hard, highly compressed rock formations.

“In rock drilling, dual rod is the jack-of-all-trades and has the most utility across the spectrum of high-pressure HDD operations,” Zylstra says. “It’s going to have some limits to its productivity in extreme environments, but there’s a huge swath of conditions in which a dual-rod machine is going to be the most suited for the job.”

Contact your nearest Vermeer dealer or consult with a Vermeer drilling or tooling specialist to find out which machine is best for your next HDD job. 



Visit the Vermeer Corporation Storefront


Discussion

Comments on this site are submitted by users and are not endorsed by nor do they reflect the views or opinions of COLE Publishing, Inc. Comments are moderated before being posted.