1. Cat Pumps hydroexcavating pumps
Over 50 years of high-pressure pump manufacturing experience has earned Cat Pumps a reputation of producing the high-quality, long-lasting pumps in the markets it serves. With its dedication to zero-defect manufacturing, ease of service and availability from stock, Cat Pumps designs and builds high-pressure pumps and systems to suit the demanding environments of the hydroexcavation industry. Popular models include Model 56 with 5.5 gpm at 3,500 psi, Model 56HS with 8 gpm at 3,000 psi, Model 660 with 10 gpm at 3,000 psi; and Model 3560 with 20 gpm at 4,000 psi or 25 gpm at 3,000 psi. 763-780-5440; www.catpumps.com
2. MB Crusher MB-R800 drum cutter
The MB-R800 drum cutter is the second-largest in MB Crusher’s range of drum cutters and is compatible with any brand of excavator. The MB-R800 drum cutter is perfect when prepping the job site and grinding or breaking hard materials. Thanks to the unit’s twin-drive motor system, power is distributed to the side needing more power, allowing the unit to process the material evenly. The MB-R800 drum cutter is easily maintained as some maintenance can be done right on the job site. 855-622-7874; www.mbamerica.com
3. Andax Industries Big Containment Pac spill kit
The Big Containment Pac from Andax Industries is a spill kit that fits in an 18-by-15-by-5-inch vacuum-sealed package that easily fits behind truck seats or in other tight spaces. The Pac includes everything needed to respond to a spill up to 110 gallons including three 48-inch oil-selective Sorb Sox (mini-booms), 20 15-by-19-inch oil-selective absorbent pads, a disposal bag and tie, protective gloves, plus a 60-by-10-inch high pop-up containment pool with a carrying case and Co2 cylinder. In the event of a spill, the mini-booms and absorbent pads can be used to block off a storm drain or waterway while the inflatable pop-up pool can contain the bulk of the spill. The Big Containment Pac is a complete spill response system in one pilfer-proof package. 800-999-1358; www.bigcontainmentpac.com
4. Ditch Witch MT26 microtrencher
The MT26 microtrencher from Ditch Witch helps operators create a clean, deep, narrow trench in one easy pass and easily install cable deep enough to meet most requirements with minimal disruption to the surrounding infrastructure. Designed with a standard hydraulic plunge to provide variable depth control, the MT26 can cut a clean trench from 1.5 inches up to 3 inches wide and down to 26 inches deep. Reaching depths of up to 26 inches allows contractors to install a typical 2-inch fiber or power cable line with the required 2 feet of ground cover all at the same time. Additionally, the ability to create a trench up to 3 inches wide helps simplify the trench cleaning process, especially when installing at deeper depths. The MT26 does this by vacuum excavating the spoils from the microtrencher simultaneously as the microtrencher cuts along the road. 580-336-4402; www.ditchwitch.com
Continue reading for free
